Charging your iPhone while it’s connected to a power source is an important part of the daily routine. But what if you need to charge your phone but can’t get water out of the charging port? Don’t worry, there are a few easy steps you can take to get water out of the charging port and charging your iPhone as usual. This step-by-step guide will walk you through each step. ###
What You’ll Need
If your iPhone is not charging, there may be water build-up inside the charging port. Here are four easy ways to get water out of your iPhone charging port:
1. Remove the battery and plug in your iPhone to a power source.
2. Use a vacuum cleaner with a hose attachment to suck the water out of the charging port.
3. Blow air into the charging port from a small fan or air pump.
4. Use cotton swabs soaked in rubbing alcohol or isopropyl alcohol to remove any remaining water from around the connector pins on the side of the phone.
How to Do It
If you find that your iPhone is not charging as quickly as it once did, it might be due to the water that has accumulated inside of the charging port. This can be a frustrating issue to deal with, but there are several easy ways that you can get water out of your iPhone charging port without having to go through Apple.
Before starting any of these methods, it is important to understand that water will not evaporate or dissolve any electronics inside of a charging port. If you have tried all the other solutions and still cannot charge your phone, then you should take it into an Apple store for service.
Here are four easy ways to get water out of your iPhone charging port:
1) Use a can of compressed air: After opening the can of compressed air, point it toward the center of the plug while turning it on. Hold the nozzle against the bottom of the plug and turn it off when the clapping sound stops. This method is best used if there is only a small amount of water remaining in the charging port.
2) Use boiling water: Boil some water and pour it into a bowl. Place your iPhone in the boiling water for about 30 seconds, or until most of the water has been eliminated. Be sure to use caution while doing this as boiling water can be dangerous if spilled.
3) Use vinegar: Pour white vinegar into a cup and place your iPhone in it for about 15 minutes.
Unplug your iPhone before attempting to remove water
If your iPhone is wet, you’ll need to remove the water before attempting to remove the battery or charging port. The easiest way to do this is to put your iPhone in a bowl of rice. When the phone is fully submerged, use a plunger to suction onto the sides of the bowl and push and pull until the water is out. Don’t force it; you may damage your phone. If necessary, use a cotton swab dipped in acetone or alcohol to remove any residual water.
Gently wiggle the phone while using a wet cloth
If your iPhone is not charging, there may be water inside the charging port that needs to be removed. If you have tried using a dry cloth and it still doesn’t charge, try gently wiggling the phone while using a wet cloth. This method has been proven to get water out of charging ports more often than not.
Heat up a pot of water and pour it over the iPhone
If you’ve ever tried to get the water out of your iPhone’s charging port and failed, you’re not alone. It can be really frustrating trying to pry the sucker open with a toothpick or even using a screwdriver!
Here are some easy ways to get water out of your iPhone charging port:
1. Heat up a pot of water and pour it over the iPhone. Plastic will melt and allow water to flow out.
2. Use a plunger. Place the plunger over the charging port and push down firmly until the water comes out. Be careful not to scratch the phone!
3. Use a hair dryer. Turn on the heat setting and hold the iPhone close to the heat source for about 30 seconds. The heat will loosen any stubborn water molecules.
Let the iPhone sit in the hot water for 30 minutes
If your iPhone is not charging or you’re having trouble getting water out of your iPhone’s charging port, try these easy tips.
– Make sure the power cord is plugged into an outlet and the iPhone is placed on a flat surface.
– Turn off the iPhone by touching and holding down the Sleep/Wake button until the Apple logo appears.
– After the logo appears, release the Sleep/Wake button and plug in the power cord.
– Wait 30 seconds and then try to force water out of the charging port with a straw. If it doesn’t work after trying several times, take your iPhone to an Apple Store for service.
Use a plunger to suction onto the water and pull
If your iPhone is not charging and water is getting into the charging port, try using a plunger to suction onto the water and pull. This may dislodge any debris that may be blocking the charging port. If this doesn’t work, you can try using a vacuum cleaner to suck out any water inside of the charging port.
Preparing your iPhone
If you find that your iPhone is not charging as easily as it used to, or if water keeps getting into the charging port, there are a few things you can do to help.
1. Check the connection between your iPhone and charger: Make sure that there is a good connection between your device and the charger. If there is a loose connection, it can cause problems with charging.
2. Clean the charging port: If water is constantly getting into the charging port, it may be due to debris build-up on the ports contacts. To clean them, use a Q-tip and some rubbing alcohol. Make sure to dry them off completely before re-connecting your phone and charger.
3. Replace the battery: If none of these tips work, you might need to replace your battery. This will reset all of your settings and should solve any charging issues
Tools you will need
If your iPhone’s charging port is difficult to get water out of, you can try one or more of the following solutions.
1. Use a plunger: If you have a rubber plunger, placing it over the charging port and pushing and pulling the plunger up and down will remove any water inside the port.
2. Use boiling water: Boil some water and pour it into the charging port. Be sure to use a pot with a tight-fitting lid so that the steam doesn’t escape and damage your device. After boiling for about two minutes, use your fingers to quickly remove all of the water from the port.
3. Use a vacuum cleaner: If all else fails, you can try using a vacuum cleaner with a hose attachment to suck out any water in the charging port. Make sure to turn off the power before attempting this method!
Step-by-Step Guide
If you’re experiencing water intrusion in your iPhone charging port, there are several easy ways to get the water out.
1. Make sure your phone is unplugged and dry before beginning. 2. Remove the battery and plug in your phone to a power source (like a wall outlet). 3. Use a plunger to suction onto the sides of the iPhone charger port and push and pull until all the water has been removed. 4. Reinstall the battery and test your phone to see if the issue has been resolved […].
Conclusion
We all know that keeping our phones fully charged is important, but sometimes finding the time to plug it in and get those charges flowing can be difficult. If you’re looking for an easy way to get water out of your iPhone’s charging port, keep reading! We’ve created this step-by-step guide that will show you just how easy it is to do. Not only will this method help you charge your phone more quickly, but it’ll also prevent damage to your device. Thanks for reading!
